UV DTF Wraps - 16oz

Suitable for 16oz cup.

*Use a squeegee or scraper to firmly scrape the front and back of the UV DTF print, to make sure it is adhered to the transfer film.

*Wipe surface of cup making sure it is clean and dust free.

*Trim any excess material if necessary to achieve a seamless result.

 *Carefully position the wrap on your tumbler, making sure it’s aligned correctly, as once applied, it cannot be moved or removed.

 *Use a vinyl squeegee or scraper to scrape over the top of design to remove any air bubbles. Then, peel off the transfer sheet slowly & carefully, scraping as you go.

* Hand wash only, avoid soaking or putting in the dishwasher.

* Give your UV DTF wrap a minimum of 48 hours to cure before using.

PLEASE NOTE:

Once transfer touches the surface you are applying to it is almost impossible to remove.

Please take your time when applying as we will not be responsible for any errors when applying the transfers and no warranty claims will be accepted.